Santa Class!

Directions on making bows:

3" x 6" piece Double Sided Patterned Paper
Paper Cutter
Pop-Up Glue Dots
Adhesive
Brads
1/16" Circle Punch

Step By Step:

Step 1.Cut 8 strips of 1/2" x 3", 4 strips of 1/2" x 2 1/2", and 1 strip of 1/2" x 2". It's important to cut the 1/2" x 2" strip before cutting the 1/2" x 2 1/2" strips.

Step 2.Take 4 - 1/2" x 3" strips with pattern "A" face up and put adhesive on one end of each strip.Take the other 4 - 1/2" x 3" strips with pattern "B" face up and put adhesive on one end of each strip. Take the 4 - 1/2" x 2 1/2" strips with pattern "A" face up and put adhesive on one end of each strip. Take the 1/2" x 2" strip with pattern side "B" face up and put adhesive on one end.

Step 3. Wrap the 1/2" x 3" strips and the 1/2" x 2 1/2" strips.

Step 4. Wrap the 1/2" x 2" strip.

Step 5.Use the 1/16" circle punch to punch a whole at the bottom of each "cone".

Step 6.Use a brad and attach the "cone" together.

Step 7.Place a Pop-Dot in the center of each layer.

Step 8.Stack each layer by alternating patterns.

Your Turn!